HobbyKing
CNC 3D SPINNER LARGE BLUE
| Material | aluminium 6061-T6 (anodized) |
| Weight | 80g |
| Diameter | 65mm |
| Length | 36mm |
| Mounting | 6 Hole |
| Hole circle | 34mm |
Features:, 1. It can be installed easily.,
CNC 3D spinner Large Blue Suitable for the following Engines ...5 Reviews
HobbyKing
3D SPINNER FOR DLE111 / DA100 / TMM-53 /TMM-106 / 3W 50-100 (GOLDEN)
| Shaft size | 10mm |
| Dimensions | 55x33mm |
| Bolt hole | 5mm |
HobbyKing
CNC DRILLING JIG SET_6L (DRILL:5.1MM) GOLD
| CNC Drilling Jig Set_6L (Drill | 5.1mm) Gold |
| Mounting | 6 Hole |
| Hole circle | 34mm |
| weight | 101g |
| Drill | 4.3mm Includ |
| jig(Gold) | AL6061 (anodized) |
| Rotation prevention Pin(Red) | AL6061 (anodized) |
| Drill Holders(Silver) | SKD11 (heat treatment) |
| Step 1 | insert jig into the hole to the propeller |
| Step 2 | After inserting jig, drill the first hole using the silver drill guide |
| Step 3 | Place rotation prevention pin (red) into the drilled hole |
| Step 4 | Drill the remainder of the holes using the drill guide. |
HobbyKing
3D SPINNER FOR DLE30 (33X33X26MM) RED
| Shaft size | 10mm |
| Bolt hole | 4.3mm |
5 Reviews
HobbyKing
FUTABA 12ZH PCM/PPM G3 2048 W/R6014HS 2.4GHZ RECEIVER (MODE 1)
Features:, • Dial-N-Key setup and the single joy stick button to move the cursor in 4 directions, Includes:, 12ZH 12-Channel Transmitter,
Futaba 12Z 12-Channel PCM G3 2048 Radio System w/R6014HS 2.4GHz ...5 Reviews
HobbyKing
3DSPINNER FOR HP-50 / DLE55 / DA50 / JC51 (41X41X26MM) BLUE
| Shaft size | 10mm |
| Bolt hole | 5mm |
HobbyKing
CNC 3D SPINNER MEDIUM BLUE
| Material | aluminium 6061-T6 (anodized) |
| Weight | 55g |
| Diameter | 55mm |
| Length | 32mm |
| Mounting | 6 Hole |
| Hole circle | 29mm |
Features:, 1. It can be installed easily.,
CNC 3D spinner Medium Blue Suitable for the following Engines ...HobbyKing
HXT 2730 DIY KIT
| Wire Guage | .44mm |
| https | //www.hobbyking.com/hobbyking/store/comersus_viewItem.asp?idProduct=3613 |
5 Reviews
HobbyKing
TELEBEE R/C CAR GYRO FOR DRIFT MANEUVERS
| Dimension | 20x20x15mm |
| Weight | 11 grams |
| Voltage used | 4.2V to 7V |
| High-speed pulse output for digital Servo | 265Hz-333Hz |
| Standard pulse output for regular Servo | 50Hz |
| Current | approx 33mA |
| Operating temperature | -5°C to +60°C |
Features:, Compact piezoelectric gyro sensor, Specifications:,
Telebee car gyro specially designed to perform drifting maneuvers for ...5 Reviews
HobbyKing
TURNIGY G60 BRUSHLESS OUTRUNNER 400KV (.60 GLOW)
| RPM | 400kv |
| Max current | 40A |
| No load current | 10V/2.7A |
| Current capacity | 60A/15sec |
| Internal resistance | 0.06 ohm |
| Diameter of shaft | 6mm |
| Dimensions | 81x50mm |
Battery:, 5~7 Cell /18.5~25.9V, Weight:, 359g (not including connectors),
Designed to be a direct swap out for your .60 ...5 Reviews
HobbyKing
STAND OFF MOUNTS (4PC) 30MM
| Length | 30mm |
| Hole Diameter | 5.1mm |
| Weight | 4g each |
| Material | Alloy |
5 Reviews
HobbyKing
HOBBYKING GLIDER NOSE TOW-LINE RELEASE (11.7X42MM)
| Length | 42mm |
| Outside diameter | 11.7mm |
| Weight | 4.5g |
5 Reviews
HobbyKing
TURNIGY MULTI-BLADE MICRO TACHOMETER
Features:, Ultra sharp backlit LCD,
Ever wanted to know how fast your motor is spinning? ...5 Reviews
HobbyKing
TURNIGY G46 BRUSHLESS OUTRUNNER 670KV (.46 GLOW)
| RPM | 670kv |
| Max current | 40A |
| No load current | 10V/3.9A |
| Current capacity | 55A/15sec |
| Internal resistance | 0.04 ohm |
| Diameter of shaft | 6mm |
| Dimensions | 76x50mm |
Battery:, 4~5 Cell /14.4~18.5V, Weight:, 303g (not including connectors),
Designed to be a direct swap out for your .40 ...5 Reviews
HobbyKing
3DSPINNER FOR HP-50 / DLE55 / DA50 / JC51 (41X41X26MM) RED
| Shaft size | 10mm |
| Bolt hole | 5mm |
5 Reviews